Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                  Laptop for rent: $35 per day plus $10 for additional day

rental
 

 

How to publish the DNS Server on ISA

 

1. Run ISA Server management.
2. Click Firewall Policy.
3. On the Firewall Policy task pane under the Tasks tab in the left pane, click Create New Server Publishing Rule to start the New Server Publishing Rule Wizard.
4. On the Welcome page of the wizard, type a name for the rule, for example PublishDNS, and then click Next.
5. On the Select Server page, type the IP address for the DNS server, and then click Next.
6. On the Select Protocol page, select DNS Server, and then click Next.
7. On the IP Addresses page, select the network on which ISA Server
will listen for requests. Because you want to receive name resolution requests from the Internet, select External, and then click Next.
8. On the Completing the New Server Publishing Rule Wizard page, verify that you have configured the rule correctly, and then click Finish.
9. In the ISA Server details pane, click Apply to apply the changes you have made.
10. You must also update your name server record for your Internet domain to point to the external IP address of the ISA Server computer, for example isa.chicagotech.net.
Note: There is an access rule in the ISA Server system policy that allows the DNS protocol from the ISA Server computer to all networks. This rule is enabled by default when you install ISA Server, so you do not have to create this rule. If you have an issue with DNS on ISA, you may double check it.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics


 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.