Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Wireless  |  Forums   | Site Map | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |              



How to enable Windows RRAS name resolution for VPN client

For a VPN client to can resolve full computer name and NetBIOS name of computers on a remote network automatically, you can enable broadcast name resolution on a Windows server running Routing and Remote Access. The broadcast name resolution is enabled by default. However, if you enable or disable broadcast name resolution, you must restart the Routing and Remote Access service on the server for which you enabled or disabled broadcast name resolution.

To enable or disable broadcast name resolution

  1. Open RRAS
  2. Right-click the name of the server on which you want to enable or disable broadcast name resolution, and then click Properties.
  3. On the IP tab, select or clear the Enable broadcast name resolution check box, and click OK.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

Browsing over VPN
Setup Windows VPN Client
Setup Windows VPN server

VPN Setup
VPN Name Resolution
VPN as Router
VPN Routing Issues

Previous Page   Next Page




Hit Counter   This web is provided "AS IS" with no warranties.
Copyright 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.