How to find out which port HP Blade server uses

How to find out which port HP Blade server uses

1. To find out which port a HP Blade server uses, you can download HP Ethernet Connectivity Mapper from http://chicagotech.net/Tools/hpecm.exe.

2. Run hpecm.exe.

3. For the S1-1 in Device Bay 1 means it is connecting to Switch Bay 1 (which is left switch if you face to the switch), port 1. For the Device Bay 7, it is connecting to switch Bay 1, port 15 and LAC 4 = when configuring the NICs for teaming application will create an extra interface which is where the IP address of the team is configured.

Post your questions, comments, feedbacks and suggestions

Contact a consultant