Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                 

 

 

Terminal Server - How to

Auto logon TS
Can't I stop and restart the Terminal Services
Closing program running on the TS logs off automatically
Differences between Remote Desktop Connection in Windows XP and Terminal Services in Windows Server
Do I need to install printer driver on TS
How to allow a user remote access Windows SBS or DC
How to Assign a Home Folder to a User
How to add a client-attached printer within a TS client session manually
How to assign permission to control other session remotely

How to change TS default logon prompt to domain
How to clear Terminal Server 2000 licenses
How to Configure Group Policy Object for Terminal Services Servers
How to configure TS Remote Control using Group Policy
How to configure TS Remote Control using TS Connections

How to display a list of session and IDs
How to disable changing display
How to display a warning screen before logon TS
How to enable Remote Desktop remotely
How to improve RDP connection performance
How to initiate a Remote Control session
How to limit one TS user on one device
How to manage Terminal Services through commend-line tools
How to modify Terminal Server's accessing port
How to Print to a Local Network Printer in TS
How to redirect TS client printers
How to restrict TS users to a single remote session
How to setup a local printer for TS redirection
How to setup Windows 2003 as VPN server with one NIC
How to setup TS licensing server
How to start a programs in Terminal Server when logon
How to start multiple programs in Terminal Server
How to switch applications between TS and local
How to Switch TS Mode
How to Temporarily Disable Terminal Server Client Logons
How to use shadow command to remote monitor and control another's session
How to use diskless computer to run windows terminal server
How to Use Terminal Services Manager
Mapping Terminal Server Drive
Prevent all users but administrator to reboot TS
RDC map local drive on win 2000 using Drive Share Utility
Remote Administration of Windows Server 2003 limits two sessions
Restrict access to local drive
redirection non-supported printer to Terminal Server
Shortcut keys for Terminal Services and Remote Desktop
Top 10 Checklists of Group Policy Troubleshooting
Info: TS/RDP Client 6.0 Authentication issue
Terminal Services Group Policy
TS licensing server high availability on Windows 2008 cluster
Windows 2008 TS Web Access Client requirements
Windows 2008 Remote Desktop Services How to

How to Assign a Home Folder to a User

1) Open the use's Properties dialog box, select Profile or TS Profile.
2) Create a logon batch file including net use command.

Still need help, contact consultant         Your feedback and contributions to this web site

How to add a client-attached printer within a TS client session manually

If the TS server you are connecting to has Windows Printer Mapping disabled, you can map your client LPT ports manually. To do this, go to TS Start>Settings>Printers>Add Printer>Local printer, clear the Automatically detect and install my Plug and Play printer check box, and then click Next. Under Port Selection, you see several ports named TSxxx. These are client mapped ports. Click the port that corresponds to your client computer's name and port, and then click Next. Continue to follow the instructions on your screen to complete the printer installation.

 

How to display a list of session and IDs

To display a list of sessions and their session IDs, type query user at the command line on the server, and then press ENTER. The following output is displayed.

How to disable changing display

 To disable Display, you have two choices. One is the Win 2000 regular way, Local Computer Policy>User Configuration>Administrative Templates>Control Panel>Display. Two, Run TS Configuration>Connections>RDP-Tcp>Properties>Environment>Client Wallpaper, check Disable Wallpaper.

How to assign permission to control other session remotely

Administrators, by default, can use Remote Control with other users' sessions. Users do not have this right. To give specific rights for groups other than Administrators: start the Terminal Services Configuration tool, double-click the connection you want to modify, click the Permissions>Advanced>Add. Specify the user or group you want to add so the user or group can use Remote Control. After adding the user or group, the Permission Entry dialog box appears. Click to select the Allow column for Remote Control.

How to initiate a Remote Control session

To initiate a Remote Control session: run a Terminal Server Client session to the Terminal Server. When the session is running, start Terminal Services Manager. Connect to the server on which the user is logged on. Right-click the user's name, and then click Remote Control. By default, the user is prompted to accept the Remote Control session. When the user accepts your request you can interact with the user's environment.

How to restrict TS users to a single remote session

1. With Server 2003, you can setup a policy to prevent a single user from creating multiple sessions on the Terminal Server using a single user account.
2. If you are running 2000, create a shared folder allowing only one connection, and then create a batch file to logoff the second session.

How to Print to a Local Network Printer in TS

By design, the TS doesn't supports the autocreation of local network printers. However, you may redirect the local network printer by mapping it to LPT port, which you may have to do if you're using a computer rental.

How to redirect TS client printers

By default,  local printers with COM, LPT, or USB ports will be redirected when a TS RDP 5 client logs on to a TS session. However, when clients connect to a TS session and the clients have network printers configured, the client's network printers are not redirected. If TS users need to print to a network printer, they may have two options. 1) The client may set up the network printer on the TS computer through the Add Printer Wizard and enable users to select and print to that printer. 2) Map a local port (LPT#) on the client side to the network path and install a printer driver on the TS computer.

If TS doesn't redirect the client printers, check the following:
1. Make sure the TS has the printer driver. If not, install it.
2. If the server does not find a matching driver name from those drivers that are currently installed, you may need to add the drive name into ntprint.inf. ntprint.inf is located in the %systemroot%inf.
3. We find some multifunction printer can't be redirected, especially if it uses DOT4 port. In this case, you may try to keep the DOT4 printer and create another printer (load printer drive only) on LPT1.
4. If you want to redirect a network printer, you can map it by using net use lpt# \\servername\printername /persistent:yes command.

How to setup a local printer for TS redirection

1) The TS should have the client's printer driver installed at the server.
2) The TS should have NetBIOS name resolution to the TS Client computer. If you have a domain network, you should use WINS for NetBIOS name resolution. If you cannot use WINS, then you may want to use a static IP address.
3) You need to share the local printer on the client computer.

How to switch applications between TS and local

When running full screen, you can use 1) Ctrl+Esc to show icons bar and then pick up the local application; 2) Alt+Tab to select application you want to; 3) Ctrl+Alt+Pause to part screen or full screen

How to Switch TS Mode

If you want to switch Remote Administration Mode to Application Mode, you must remove and reinstall Terminal Services using Add/Remove Programs.

Still need help, contact consultant          Your feedback and contributions to this web site

How to use diskless computer to run windows terminal server

To run windows TS, you need to 1) create a boot floppy disk; 2)  modify  your DHCP server.  3) configure a windows TFTP server so that the clients can logon the TS.

How to use shadow command to remote monitor and control another's session

You can use the shadow command to view or actively control an active session of another user. If you actively control a user's session, you can input keyboard and mouse actions for that session. Shadow command syntax: shadow {session_name | session_id} [/server:server_name] [/v]

For example, to shadow session ID 2, type shadow 2. To shadow the session rdp-tcp#3, type shadow rdp-tcp#3.

How to redirect TS client printers

By default,  local printers with COM, LPT, or USB ports will be redirected when a TS RDP 5 client logs on to a TS session. However, when clients connect to a TS session and the clients have network printers configured, the client's network printers are not redirected. If TS users need to print to a network printer, they may have two options. 1) The client may set up the network printer on the TS computer through the Add Printer Wizard and enable users to select and print to that printer. 2) Map a local port (LPT#) on the client side to the network path and install a printer driver on the TS computer.

If TS doesn't redirect the client printers, check the following:
1. Make sure the TS has the printer driver. If not, install it.
2. If the server does not find a matching driver name from those drivers that are currently installed, you may need to add the drive name into ntprint.inf. ntprint.inf is located in the %systemroot%inf.
3. We find some multifunction printer can't be redirected, especially if it uses DOT4 port. In this case, you may try to keep the DOT4 printer and create another printer (load printer drive only) on LPT1.
4. If you want to redirect a network printer, you can map it by using net use lpt# \\servername\printername /persistent:yes command.

How to add a client-attached printer within a TS client session manually

If the TS server you are connecting to has Windows Printer Mapping disabled, you can map your client LPT ports manually. To do this, go to TS Start>Settings>Printers>Add Printer>Local printer, lear the Automatically detect and install my Plug and Play printer check box, and then click Next. Under Port Selection, you see several ports named TSxxx. These are client mapped ports. Click the port that corresponds to your client computer's name and port, and then click Next. Continue to follow the instructions on your screen to complete the printer installation.

How to display a list of session and IDs

To display a list of sessions and their session IDs, type query user at the command line on the server, and then press ENTER. The following output is displayed.

How to assign permission to control other session remotely

Administrators, by default, can use Remote Control with other users' sessions. Users do not have this right. To give specific rights for groups other than Administrators: start the Terminal Services Configuration tool, double-click the connection you want to modify, click the Permissions>Advanced>Add. Specify the user or group you want to add so the user or group can use Remote Control. After adding the user or group, the Permission Entry dialog box appears. Click to select the Allow column for Remote Control.

How to initiate a Remote Control session

To initiate a Remote Control session: run a Terminal Server Client session to the Terminal Server. When the session is running, start Terminal Services Manager. Connect to the server on which the user is logged on. Right-click the user's name, and then click Remote Control. By default, the user is prompted to accept the Remote Control session. When the user accepts your request you can interact with the user's environment.

How to Print to a Local Network Printer in TS

By design, the TS doesn't supports the autocreation of local network printers. However, you may redirect the local network printer by mapping it to LPT port, which you may have to do if you're using a computer rental.

How to setup a local printer for TS redirection

1) The TS should have the client's printer driver installed at the server.
2) The TS should have NetBIOS name resolution to the TS Client computer. If you have a domain network, you should use WINS for NetBIOS name resolution. If you cannot use WINS, then you may want to use a static IP address.
3) You need to share the local printer on the client computer.

How to switch applications between TS and local

When running full screen, you can use 1) Ctrl+Esc to show icons bar and then pick up the local application; 2) Alt+Tab to select application you want to; 3) Ctrl+Alt+Pause to part screen or full screen

How to Switch TS Mode

If you want to switch Remote Administration Mode to Application Mode, you must remove and reinstall Terminal Services using Add/Remove Programs.

Still need help, contact consultant          Your feedback and contributions to this web site

How to use diskless computer to run windows terminal server

To run windows TS, you need to 1) create a boot floppy disk; 2)  modify  your DHCP server.  3) configure a windows TFTP server so that the clients can logon the TS.

How to use shadow command to remote monitor and control another's session

You can use the shadow command to view or actively control an active session of another user. If you actively control a user's session, you can input keyboard and mouse actions for that session. Shadow command syntax: shadow {session_name | session_id} [/server:server_name] [/v]

For example, to shadow session ID 2, type shadow 2. To shadow the session rdp-tcp#3, type shadow rdp-tcp#3.

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.