Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |                  Laptop for rent: $35 per day plus $10 for additional day

rental
 

 

Can’t access Server 2003

Situation: The server 2003 can ping and access any computers in the LAN while no computers can access the server and ping it.

Troubleshooting: 1. Make sure No firewall running.

2. Make sure the ISA is disabled.

3. Make sure no IP filtering is enabled.

4. The server can ping it self.

5. Network Monitor displays that the NIC receiving and sending packets.

6. RRAS displays a red narrow down icon and Services show the RRAS is not running (Picture).

Resolution: Enable and start RRAS and ISA. Note: the ISA must be started (if the ISA is installed) when starting RRAS.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

One way ping only
2003 server FAQs
2003 server - how to

Troubleshooting 2003 server

Previous Page   Next Page
 

 


 

 

Hit Counter   This web is provided "AS IS" with no warranties.
Copyright © 2002-2018 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.