|
Troubleshooting Computer Browser Issues
The computer browser is to
display a directory of all known computers or domains that the computer can
reach. The purpose of the browser service is to collect and report the existence
of other computers on the network that are sharing file, print, and other
resources from the active browser or master servers on each of its active
endpoints such as each network protocol that is running on each network card.
For example, a computer with TCP/IP and NetBEUI installed
on the network interface cards A and B would have four endpoints for the
computer browser client.
If the browser client is trying to locate a browser server on each endpoint. It
waits until it either one receives valid information or times out on each
endpoint before returning. This process can be slow if there is an endpoint that
does not contain browser servers or the active network card is not connected to
the network. Also Multihomed servers can create unexpected and undesirable
effects with the browser service and a master browser cannot be multihomed
because the PDC will contact only the master browser on one of its network
adapters.
In general,
computer browser performance improves with fewer protocols or network cards on a
computer. All domain controllers must be singlehomed computers for browsing to
operate correctly. Also the computer browser is dependent on NetBIOS. Therefore,
in a mixed OS network environment (win9x, NT, ME, W2K and XP), you should have a
WINS server in a domain network and enable NetBIOS over TCP/IP (instead of
loading NetBEUI) on w2k/xp in the home or small network.
In a small mixed OS network, you may want disable W2K/XP master browser and
keep w9x or NT master browser
In a small mixed OS workgroup network, you may want to disable W2K/XP master
browser and keep w9x or NT master browser because XP/W2K always win elections
over others, and other previous OS doesn't understand it. To disable master
browser on W2K/XP, go to Administrative Tools>Services, stop the Computer
Browser.
Re-register
NetBIOS name
To re-register NetBIOS name, run nbtstat -RR command.
To troubleshoot browser problem, the important data is NetBT_<driver_name>,
which indicates the protocol and network card binding, also known as an
"endpoint." The potential protocols you may see are: Nbf_netcard = NetBEUI
NetBT_netcard = TCP/IP (or NetBIOS over TCP/IP) NwlnkIpx = IPX/SPX (NwLink)
[will not indicate netcard] NwlnkNB = NetBIOS over NwLink [will not indicate
netcard].
The master browser of a domain is always the primary domain controller. If
it's not, you will get lots troubles.
Post your questions, comments, feedbacks and suggestions
Contact a consultant
|
|
