Home | Troubleshooting |  Quick Setup  |  Cisco How to  |  Data Recovery  |  Forums   | Blog | IT Exam Practice | Services  | About Us | Chicagotech MVP  | Search  | Contact Us  |               Select a Topic VPN How To Network How To Remote Access How To Windows How To Internet How To New Topics    Laptop for rent: $35 per day plus $10 for additional day

Configuring the Network Settings of Branch Office Server

Network settings can be configured during the initial installation of the Windows or after the installation. To configure the network settings on the server you plan to install DC on the remote office, please follow theses steps:

1. Log on to the server using the local administrator.

2. Open Network Connections.

3. Right-click the appropriate active Network connection and then click Properties.

4. Click Internet Protocol (TCP/IP) and then click Properties.

5. In the Internet Protocol (TCP/IP) Properties dialog box, click Use the following IP address. Assign a static private IP address, Default Gateway and main office DNS as Preferred DNS.

6. Click OK to close the Internet Protocol (TCP/IP) Properties dialog box, click Close to close the active network connection properties window, and then close Network Connections.

Post your questions, comments, feedbacks and suggestions

Contact a consultant

Related Topics

Procedures of Installing Domain Controller in Remote Office over VPN/WAN

1. Configuring the Network Settings – assign the main office DNS as Preferred DNS.
2. Verifying Name Resolution on the New Server – ping each other by FQDN.
3. Adding a Delegation for the Zone – add the remote office server you plan to install DC on it.
4. Installing Active Directory – use dcpromo.
5. Re-Configuring the office's DNS - use itself as its preferred DNS server and main office DNS as its alternate DNS server.
6. Configuring the DNS servers to forward requests – add the IP addresses of the DNS servers from the main office.